Dabcool Vaporizers

Features:

1. On/Off:Press For 3seconds

2. 4 Unique Manual Heat Settings(450ºF/500ºF/550ºF/600ºF)

3. 20 Second Average Heat-Up Time

4.Micro-USB Fast Charging, Full Charge Time:About 2 Hours

5.Atomizer For Puff    peak

6.The Device Has Low Voltage Protection, Short Circuit Protection And Overheating

Protection.

7.1500mah built in lipo battery

Packing:

A: Alcohol Pad

B: Micro-USB SuperCharger

C: Loading Tool

D: Glass Attachment

E: Atomizer

F: Base

G: Silicone Box

H: Carb Cap

I : Extra Bowl*2

How to use:

STEP 1: Fully charge device before first use. White lights pulse while charging, and turn

off automatically when complete.(1 light: 0-25%; 2 lights: 25-50%; 3 lights: 50-75% ;

4 lights: 75-100%)

STEP 2: Fill glass with water just above the air-hole. Do not fill glass while attached to base.

X- Do not allow water in lower section!

STEP 3: Align inlet hole on the front of the glass with atomizer. Carefully place the glass

into the base.

STEP 4: Hold the button for 3 seconds to turn on device (same way to turn off device).

The white lights will flash once and the ambient lights will flash sequentially red>blue>

green.

STEP 5: Single click to toggle through heat settings.

1 white light: 450ºF       2 white lights: 500ºF

3 white lights: 550ºF      4 white lights: 600ºF

Device will vibrate once while changing heat.

STEP 6: Use Loading Tool to place contents on the bottom surface of the bowl [not the side].

STEP 7: Place carb cap on top of atomizer.

STEP 8: Double click to initiate heat-

up [5 seconds avg. ], device will vibrate twice and ambient lights will be red. Single click

the button to turn off the heat-up process at anytime.    

STEP 9: Ambient lights will turn green when ready.   ( green lights will be on for 20

seconds, then heat up process automatically stop and ambient lights turn blue)  

STEP 10: Use a cotton swab to clean the chamber after each use.

Q1. How about the MOQ?

Q2. Can I ask samples for testing before placing an order?
A. Yes we can send you some samples as your quality check, customer need to pay sample charge and shipping cost.
Q3. Can I make our logo on your vape product?
A. Yes, we accept OEM service.Please send us your logo design.
Q4. What is your terms of payment, how can we pay you?

A: Our company can accept both T/T, Paypal payment or others. If you have any other payment requirements, please leave message or contact our online salesman directly.