Electronic hydrometer installation method - Huaqiang Electronic Network

Brand AVX TPSE226M035R0125 Low impedance tantalum capacitor AVX 22

Electronic scale crystal oscillator 3.2*2.5mm 3225 16M (16.000MHZ) 12PF 10PPM 20PPM 30PPM

Huaqiang Square crystal original spot stock

Installation Environment

1. The ideal place to place is in an environment of 20 ° C / 68 ° F and humidity of 50%.

2. The installation position of the machine should avoid direct sunlight, vibration, wind, dust and magnetic field interference.

3Disposable Vape, Electronic Cigarettes, vape

Confirm that the voltage used matches the required voltage of the model

▼ Install the draft shield and place the machine in the draft shield.

▼

Level adjustment

Use the foot to adjust the level and adjust the bubble in the level to the center of the black circle to make the whole machine level.

▼

Sink installation

Distilled water was poured into the water tank to the top of the four frosted invisible lines on the water tank. After the surrounding water was wiped dry, the water tank was placed in two concave fixing grooves on the main machine.

▼

Measuring station installation

The measuring table is placed on the measuring plate, and the four projections of the measuring table are placed in the four concave fixing grooves of the measuring plate. At this point, please note that the hanging bar should be submerged in the water and that the hanging bar is not in contact with the sink.